Text size:

Decorations Act

Issuer:Riigikogu
Type:act
In force from:01.01.2015
In force until: In force
Translation published:28.01.2015

Chapter 1 GENERAL PROVISIONS 

§ 1.  Scope of application of this Act

 (1) This Act establishes the national awards (hereinafter, ‘decorations’) to be bestowed by the President of the Republic, provides their classes and descriptions, the procedure for bestowal, wearing, withdrawal, and return of decorations, the procedure for registration of orders of honour and orders of merit, and liability for violations of this Act.

 (2) The provisions of the Administrative Procedure Act apply to the administrative procedure described in this Act without prejudice to the provisions of this Act.

§ 2.  National decorations

 (1) Decorations are:
 1) Vabadusristi aumärk [the Order of Honour of the Cross of Liberty];
 2) Riigivapi teenetemärk [the Order of Merit of the National Coat of Arms];
 3) Maarjamaa Risti teenetemärk [the Order of Merit of the Cross of Terra Mariana];
 4) Valgetähe teenetemärk [the Order of Merit of the White Star];
 5) Kotkaristi teenetemärk [the Order of Merit of the Cross of the Eagle];
 6) Eesti Punase Risti teenetemärk [the Order of Merit of the Estonian Red Cross].

 (2) It is prohibited to establish, manufacture or use an order of honour or order of merit or any other emblem whose similarity to a decoration established in this Act is such as to render it likely to be confused with that decoration.

§ 3.  Cross of Liberty

 (1) The Cross of Liberty was instituted in 1919 to give recognition for meritorious service during the Estonian War of Independence. The Cross of Liberty is a military decoration bestowed during a war conducted to defend the independence of Estonia.

 (2) The Cross of Liberty comprises three divisions:
 1) Division One - bestowed to give recognition for military service during a war conducted to defend Estonian independence;
 2) Division Two - bestowed to give recognition for personal valour during a war conducted to defend Estonian independence;
 3) Division Three - bestowed to give recognition for administrative and civil service during a war conducted to defend Estonian independence.

 (3) Bestowal of the Cross of Liberty was terminated by the Act of 19 June 1925 (RT1 1925, 109/110, 53). The Cross of Liberty may be bestowed again in the event of a war conducted to defend the independence of Estonia as of the declaration of the state of war until the entry into force of an Act to terminate the bestowal of the Cross of Liberty.

§ 4.  The Order of Merit of the National Coat of Arms

 (1) The Order of Merit of the National Coat of Arms was instituted in 1936 to commemorate 24 February 1918 - the day on which the independence of Estonia was proclaimed. The Order of Merit of the National Coat of Arms is bestowed only on Estonian citizens as the highest decoration to give recognition for services rendered to the state.

 (2) The President of the Republic is holder of the Order of Merit of the National Coat of Arms, Collar Class. The collar of the Order is passed on together with the office of the President.

§ 5.  The Order of Merit of the Cross of Terra Mariana

  The Order of Merit of the Cross of Terra Mariana was instituted in 1995 as a tribute to the independence of the Estonian state. The Order of Merit of the Cross of Terra Mariana is bestowed on foreigners as the highest decoration to give recognition for service rendered to the Republic of Estonia.

§ 6.  The Order of Merit of the White Star

  The Order of Merit of the White Star was instituted in 1936 to commemorate the fight for freedom of the Estonian people. The Order of Merit of the White Star is bestowed on individuals in the service of the government or of local authorities, or to give recognition for services or achievements of nation-wide importance in economy, education, science, culture, sports or other areas.

§ 7.  The Order of Merit of the Cross of the Eagle

  The Order of Merit of the Cross of the Eagle was instituted in 1928 by the National Defence League to commemorate the tenth anniversary of the independence of Estonia. The Order of Merit of the Cross of the Eagle is bestowed in order to give recognition for military service and service in the field of national defence.

§ 8.  The Order of Merit of the Estonian Red Cross

  The Order of Merit of the Estonian Red Cross was instituted in 1920 by the Estonian Red Cross Society. The Order of Merit of the Estonian Red Cross is bestowed to give recognition for service rendered to the interests of the Estonian people in healthcare and social spheres and for the saving of life.

§ 9.  Decoration holder

 (1) Decorations may be bestowed on Estonian citizens and on foreigners.

 (2) Decorations may also be bestowed posthumously.

 (3) Decorations for combat service may also be bestowed on military units or sub-units.
[RT I 2008, 35, 213 - entry into force 01.01.2009]

 (4) A person whose decoration has been withdrawn is not deemed a decoration holder.

Chapter 2 BESTOWAL, WEARING AND WITHDRAWAL OF DECORATIONS 

§ 10.  Bestowal of decorations

 (1) The regular bestowal of decorations takes place once a year on the occasion of 24 February, Independence Day.

 (2) Decorations may also be bestowed at any other time in exceptional cases, including in the event of a state visit or if a diplomat accredited to Estonia departs from Estonia upon expiry of his or her term of office, or posthumously.

 (3) During the time of peace, a person who has been awarded a decoration may generally be awarded another decoration for similar service when five years have passed since the adoption of the decision concerning bestowal of the previous decoration and for different service when three years have passed since the adoption of the decision.

 (4) Before bestowing a decoration upon a foreigner the President of the Republic hears the opinion of the minister responsible for the area.

 (5) Decorations together with the corresponding certificates are bestowed without charge.

 (6) The bestowal of decorations and any related operations are arranged by the Office of the President of the Republic.

§ 11.  Proposals for bestowal of decorations

 (1) Everyone, including every agency and institution, is entitled to make proposals to the President of the Republic to bestow a decoration. The Office of the President of the Republic notifies the person who made a proposal of having received the proposal.

 (2) Proposals to bestow a decoration on Independence Day are to be made to the President of the Republic by 1 November of the year preceding bestowal of the decoration.

 (3) The President of the Republic reviews the proposals to bestow a decoration and makes the corresponding decisions. The President is not required to substantiate refusals to bestow the proposed decoration.

 (4) A proposal to bestow a decoration must contain the name, date of birth and description of the service rendered by the person in regard to whom the proposal is made.

 (5) Information concerning any proposal to bestow a decoration is classified as information restricted to internal use for five years from receiving the proposal.

§ 12.  Wearing of decorations

 (1) A decoration may only be worn by the person upon whom the President of the Republic has bestowed it, provided the decoration has not been withdrawn.

 (2) Decorations are to be worn in accordance with the good practice of wearing decorations. The Office of the President of the Republic provides explanations concerning the good practice of wearing decorations.

§ 13.  Withdrawal and return of decorations

 (1) The President of the Republic may decide to withdraw a decoration when:
 1) a court judgment which convicts the holder of an intentionally committed criminal offence has become final, or
 2) circumstances are revealed which predate bestowal of the decoration to the holder and knowledge of which would have precluded the bestowal, or
 3) the subsequent conduct of the holder has been inappropriate to an extent that would preclude bestowal of the decoration upon that holder.

 (2) A decoration holder whose decoration has been withdrawn by resolution of the President of the Republic must return the decoration to the Office of the President.

Chapter 3 CLASSES AND DESCRIPTION OF DECORATIONS 

Subchapter 1 Order of Honour of the Cross of Liberty 

§ 14.  Ranks of the Order of Honour of the Cross of Liberty

  Each division of the Cross of Liberty is divided into three ranks.

§ 15.  The Cross of Liberty, Division One, First Rank

 (1) The cross of the Order of Honour of the Cross of Liberty, Division One, First Rank is a Latin cross which is 45mm high and 39mm wide, and whose embossed surface is covered in white enamel set in a gold colour border. A gold colour stripe which is 1mm wide runs down the centreline of the arms of the cross. The width of the arms is 9mm and the ends of the arms widen to form the shape of a T. The intersection of the arms bears a black circle set in a gold colour border in which are shown the letter E in gold colour and a gold colour arm with a sword, and the reverse side of the cross bears a black circle of the same size set in a gold colour border and containing an inscription of the date 24. II 1919 in gold colour (Annex 1).

 (2) The ribbon of the Cross of Liberty, Division One, First Rank is 30mm wide and made of black moiré, with a 7mm wide blue (PANTONE 285 C) and 8mm wide white stripe at both edges.

§ 16.  The Cross of Liberty, Division One, Second Rank

 (1) The cross of the Order of Honour of the Cross of Liberty, Division One, Second Rank is a Latin cross which is 39mm high and 34mm wide, and whose embossed surface is covered in white enamel set in a silver colour border. The width of the arms is 8mm and the ends of the arms widen to form the shape of a T. A silver colour stripe which is 1mm wide runs down the centreline of the arms of the cross. The intersection of the arms bears a black circle set in a silver colour border in which are shown the letter E in silver colour and a silver colour arm with a sword, and the reverse side of the cross bears a black circle of the same size set in a silver colour border and containing an inscription of the date 24. II 1919 in silver colour (Annex 1).

 (2) The ribbon of the Cross of Liberty, Division One, Second Rank is 30mm wide and made of black moiré, with a 7mm wide blue (PANTONE 285 C) and 8mm wide white stripe at both edges.

§ 17.  The Cross of Liberty, Division One, Third Rank

 (1) The cross of the Order of Honour of the Cross of Liberty, Division One, Third Rank is a Latin cross which is 36mm high and 30mm wide, and whose embossed surface is covered in white enamel set in a border of oxidised metal. The width of the arms is 7mm and the ends of the arms widen to form the shape of a T. A silver colour stripe which is 1mm wide runs down the centreline of the arms of the cross. The intersection of the arms bears a black circle set in a silver colour border in which are shown the letter E in silver colour and a silver colour arm with a sword, and the reverse side of the cross bears a black circle of the same size set in a silver colour border and containing an inscription of the date 24. II 1919 in silver colour (Annex 1).

 (2) The ribbon of the Cross of Liberty, Division One, Third Rank is 30mm wide and made of black moiré, with a 7mm wide blue (PANTONE 285 C) and 8mm wide white stripe at both edges.

§ 18.  The Cross of Liberty, Division Two, First Rank

 (1) The cross of the Order of Honour of the Cross of Liberty, Division Two, First Rank is a Latin cross which is 45mm high and 39mm wide, and whose embossed surface is covered in black enamel set in a gold colour border. The width of the arms is 9mm and the ends of the arms widen to form the shape of a T. A gold colour stripe which is 1mm wide runs down the centreline of the arms of the cross. The intersection of the arms bears a red circle set in a gold colour border in which are shown the letter E in gold colour and a gold colour arm with a sword, and the reverse side of the cross bears a red circle of the same size set in a gold colour border and containing an inscription of the date 24. II 1919 in gold colour (Annex 1).

 (2) The ribbon of the Cross of Liberty, Division Two, First Rank is 30mm wide and made of blue (PANTONE 285 C) moiré, with a 7mm wide black and 8mm wide white stripe at both edges.

§ 19.  The Cross of Liberty, Division Two, Second Rank

 (1) The cross of the Order of Honour of the Cross of Liberty, Division Two, Second Rank is a Latin cross which is 39mm high and 34mm wide, and whose embossed surface is covered in black enamel set in a silver colour border. The width of the arms is 8mm and the ends of the arms widen to form the shape of a T. A silver colour stripe which is 1mm wide runs down the centreline of the arms of the cross. The intersection of the arms bears a red circle set in a silver colour border in which are shown the letter E in silver colour and a silver colour arm with a sword, and the reverse side of the cross bears a red circle of the same size set in a silver colour border and containing an inscription of the date 24. II 1919 in silver colour (Annex 1).

 (2) The ribbon of the Cross of Liberty, Division Two, Second Rank is 30mm wide and made of blue (PANTONE 285 C) moiré, with a 7mm wide black and 8mm wide white stripe at both edges.

§ 20.  The Cross of Liberty, Division Two, Third Rank

 (1) The cross of the Order of Honour of the Cross of Liberty, Division Two, Third Rank is a Latin cross which is 36mm high and 30mm wide and made of oxidised steel. The width of the arms is 7mm and the ends of the arms widen to form the shape of a T. A silver colour stripe which is 1mm wide runs down the centreline of the arms of the cross. The intersection of the arms bears a red circle set in a silver colour border in which are shown the letter E in silver colour and a silver colour arm with a sword, and the reverse side of the cross bears a red circle of the same size set in a silver colour border and containing an inscription of the date 24. II 1919 in silver colour (Annex 1).

 (2) The ribbon of the Cross of Liberty, Division Two, Third Rank is 30mm wide and made of blue (PANTONE 285 C) moiré, with a 7mm wide black and 8mm wide white stripe at both edges.

§ 21.  The Cross of Liberty, Division Three, First Rank

 (1) The cross of the Order of Honour of the Cross of Liberty, Division Three, First Rank is a Latin cross which is 45mm high and 39mm wide, and whose embossed surface is covered in blue enamel set in a gold colour border. The width of the arms is 9mm and the ends of the arms widen to form the shape of a T. A gold colour stripe which is 1mm wide runs down the centreline of the arms of the cross. The intersection of the arms bears a white circle set in a gold colour border which shows a black letter E, and the reverse side of the cross bears a white circle of the same size set in a gold colour border and containing an inscription of the date 24. II 1919 in black (Annex 1).

 (2) The ribbon of the Cross of Liberty, Division Three, First Rank is 30mm wide and made of white moiré, with a 7mm wide blue (PANTONE 285 C) and 8mm wide black stripe at both edges.

§ 22.  The Cross of Liberty, Division Three, Second Rank

 (1) The cross of the Order of Honour of the Cross of Liberty, Division Three, Second Rank is a Latin cross which is 39mm high and 34mm wide, and whose embossed surface is covered in blue enamel set in a silver colour border. The width of the arms is 8mm and the ends of the arms widen to form the shape of a T. A silver colour stripe which is 1mm wide runs down the centreline of the arms of the cross. The intersection of the arms bears a white circle set in a silver colour border which shows the letter E in black colour, and the reverse side of the cross bears a white circle of the same size set in a silver colour border and containing an inscription of the date 24. II 1919 in black (Annex 1).

 (2) The ribbon of the Cross of Liberty, Division Three, Second Rank is 30mm wide and made of white moiré, with a 7mm wide blue (PANTONE 285 C) and 8mm wide black stripe at both edges.

§ 23.  The Cross of Liberty, Division Three, Third Rank

 (1) The cross of the Order of Honour of the Cross of Liberty, Division Three, Third Rank is a Latin cross which is 36mm high and 30mm wide, and whose embossed surface is covered in blue enamel set in a border of oxidised metal. The width of the arms is 7mm and the ends of the arms widen to form the shape of a T. A silver colour stripe which is 1mm wide runs down the centreline of the arms of the cross. The intersection of the arms bears a white circle set in a silver colour border which contains a black letter E, and the reverse side of the cross bears a white circle of the same size set in a silver colour border and containing an inscription of the date 24. II 1919 in black (Annex 1).

 (2) The ribbon of the Cross of Liberty, Division Three, Third Rank is 30mm wide and made of white moiré, with a 7mm wide blue (PANTONE 285 C) and 8mm wide black stripe at both edges.

Subchapter 2 Order of Merit of the National Coat of Arms 

§ 24.  Description of the Order of Merit of the National Coat of Arms

 (1) The pendant of all classes of the Order of Merit of the National Coat of Arms has the shape of the greater national coat of arms, is gold plated on both sides, and bears the embossed date 24. II 1918 on the reverse side.

 (2) The moiré ribbon of all classes of the Order of Merit of the National Coat of Arms is blue (PANTONE 285 C).

§ 25.  The Order of Merit of the National Coat of Arms, Collar Class

 (1) The collar of the Order of Merit of the National Coat of Arms, Collar Class is 30mm wide, made of gold, and decorated with Estonian ornamental designs. The centres of four of the ornamental devices of the collar are encrusted with precious stones. A gold plated pendant of 69mm in diameter in the shape of the greater national coat of arms is suspended from the collar (Annex 2).

 (2) The Order of Merit of the National Coat of Arms, Collar Class is issued with an eight-pointed gold star of 87mm in diameter which, in its centre, bears a badge of 42mm in diameter in the shape of the greater national coat of arms.

 (3) The Order of Merit of the National Coat of Arms, Collar Class is issued with a special sash in the form of a blue moiré ribbon whose width for male holders is 105mm and for female holders 64mm, which has a 5mm wide gold colour border and from whose bow is suspended a gilt pendant of 58mm in diameter in the shape of the greater national coat of arms.

 (4) The rosette device of the Order of Merit of the National Coat of Arms, First Class (Annex 7) also serves as the rosette device of the Order of Merit of the National Coat of Arms, Collar Class.

§ 26.  The Order of Merit of the National Coat of Arms, First Class

 (1) The Order of Merit of the National Coat of Arms, First Class consists of a sash and a silver star. The sash is a blue moiré ribbon whose width for male holders is 105mm and for female holders 64mm and from whose bow is suspended a gilt pendant of 58mm in diameter in the shape of the greater national coat of arms (Annex 2).

 (2) The silver star is an eight point star of 87mm in diameter in whose centre is set a gilt badge of 38mm in diameter in the shape of the greater national coat of arms.

 (3) The rosette device of the Order of Merit of the National Coat of Arms, First Class is a blue rosette on a gold colour base (Annex 7).

§ 27.  The Order of Merit of the National Coat of Arms, Second Class

 (1) The Order of Merit of the National Coat of Arms, Second Class consists of a gilt pendant of 55mm in diameter in the shape of the greater national coat of arms suspended from a 41mm wide blue moiré ribbon, and of a star identical to that of the Order of Merit of the National Coat of Arms, First Class (Annex 2).

 (2) The rosette device of the Order of Merit of the National Coat of Arms, Second Class is a blue rosette set on a base whose right side is of gold colour and whose left side is of silver colour (Annex 7).

§ 28.  The Order of Merit of the National Coat of Arms, Third Class

 (1) The Third Class Order of Merit of the National Coat of Arms is identical to the Second Class Order except for the absence of the star (Annex 2).

 (2) The rosette device of the Third Class Order of Merit of the National Coat of Arms is a blue rosette on a silver colour base (Annex 7).

§ 29.  The Order of Merit of the National Coat of Arms, Fourth Class

 (1) The Order of Merit of the National Coat of Arms, Fourth Class is a gilt pendant of 42mm in diameter in the shape of the greater national coat of arms suspended from a 35mm wide blue moiré ribbon. A blue rosette of 22mm in diameter is affixed to the ribbon of the decoration (Annex 2).

 (2) The rosette device of the Order of Merit of the National Coat of Arms, Fourth Class is a blue rosette (Annex 7).

§ 30.  The Order of Merit of the National Coat of Arms, Fifth Class

 (1) The Order of Merit of the National Coat of Arms, Fifth Class is identical to the Order of Merit of the National Coat of Arms, Fourth Class except that the ribbon has no rosette (Annex 2).

 (2) The rosette device of the Order of Merit of the National Coat of Arms, Fifth Class is a 3mm wide section of the ribbon of the decoration (Annex 7).

Subchapter 3 Order of Merit of the Cross of Terra Mariana 

§ 31.  Description of the Order of Merit of the Cross of Terra Mariana

 (1) The crosses with shields of all classes of the Order of Merit of the Cross of Terra Mariana are of the same size and have the same design, except for the crosses which serve as links in the collar.

 (2) The moiré ribbon of all classes of the Order of Merit of the Cross of Terra Mariana is blue (PANTONE 300 C).

§ 32.  The Order of Merit of the Cross of Terra Mariana, Collar Class

 (1) The collar of the Order of Merit of the Cross of Terra Mariana, Collar Class is 22mm wide, made of silver, and consists of twelve monograms of Mary, six Gothic shields which bear three enamelled blue lions on a gold plated background and six crosses of Terra Mariana of 22mm in diameter. The lock of the collar is a Gothic shield to which the Cross of Terra Mariana is attached (Annex 3).

 (2) The Cross of Terra Mariana is a Mantuan cross of 48mm in diameter which is made of silver, covered with white enamel on both sides, and whose arms are bordered on both sides by a blue stripe and a black stripe, each 2mm wide and enamelled.
The reverse side of the cross bears the words PRO TERRA MARIANA. A monogram of Mary appears in each of the spaces between the arms of the cross.

 (3) The Order of Merit of the Cross of Terra Mariana, Collar Class is issued with an eight point silver star of 80mm in diameter. It is surmounted by a Cross of Terra Mariana which is 48mm in diameter and in the centre of which is set a golden Gothic shield whose diameter is 16mm and which bears three blue lions.

 (4) The Order of Merit of the Cross of Terra Mariana, Collar Class is issued with a sash of the Order of Merit of the Cross of Terra Mariana, First Class which is a blue moiré ribbon that is 105mm wide in the case of a male holder and 64mm wide in the case of a female holder. A gold colour Gothic shield with three blue lions to which is affixed the Cross of Terra Mariana is suspended from the bow of the sash.

 (5) The Order of Merit of the Cross of Terra Mariana, Collar Class is issued with the rosette device of the Order of Merit of the Cross of Terra Mariana, First Class (Annex 7).

§ 33.  The Order of Merit of the Cross of Terra Mariana, First Class

 (1) The Order of Merit of the Cross of Terra Mariana, First Class consists of a sash and a silver star. The sash is a blue moiré ribbon that is 105mm wide in the case of a male holder and 64mm wide in the case of a female holder. A gold colour Gothic shield with three blue lions to which is affixed the Cross of Terra Mariana is suspended from the bow of the sash (Annex 3).

 (2) The silver star is identical to the silver star which is issued with the Order of Merit of the Cross of Terra Mariana, Collar Class.

 (3) The rosette device of the Order of Merit of the Cross of Terra Mariana, First Class is a blue rosette on a gold colour base (Annex 7).

§ 34.  The Order of Merit of the Cross of Terra Mariana, Second Class

 (1) The Order of Merit of the Cross of Terra Mariana, Second Class consists of a 40mm wide blue moiré ribbon to which is attached a gold colour Gothic shield with three blue lions to which the Cross of Terra Mariana is affixed, and of a silver star which is identical to the that of the Order of Merit of the Cross of Terra Mariana, Collar Class (Annex 3).

 (2) The rosette device of the Order of Merit of the Cross of Terra Mariana, Second Class is a blue rosette on a base whose left side is of silver colour and right side of gold colour (Annex 7).

§ 35.  The Order of Merit of the Cross of Terra Mariana, Third Class

 (1) The Third Class Order of Merit of the Cross of Terra Mariana is identical to the Second Class Order except for the absence of the star (Annex 3).

 (2) The rosette device of the Third Class Order of Merit of the Cross of Terra Mariana is a blue rosette on a silver colour base (Annex 7).

§ 36.  The Order of Merit of the Cross of Terra Mariana, Fourth Class

 (1) The Order of Merit of the Cross of Terra Mariana, Fourth Class consists of a 35mm wide blue moiré ribbon to which is attached a gold colour Gothic shield with three blue lions to which the Cross of Terra Mariana is affixed. A blue rosette of 22mm in diameter is affixed to the ribbon of the decoration (Annex 3).

 (2) The rosette device of the Order of Merit of the Cross of Terra Mariana, Fourth Class is a blue rosette (Annex 7).

§ 37.  The Order of Merit of the Cross of Terra Mariana, Fifth Class

 (1) The Order of Merit of the Cross of Terra Mariana, Fifth Class is identical to the Order of Merit of the Cross of Terra Mariana, Fourth Class except that the ribbon has no rosette (Annex 3).

 (2) The rosette device of the Order of Merit of the Cross of Terra Mariana, Fifth Class is a 3mm wide section of the ribbon of the decoration (Annex 7).

Subchapter 4 Order of Merit of the White Star 

§ 38.  Description of the Order of Merit of the White Star

 (1) The stars of all classes of the Order of Merit of the White Star have the same design but differ in size.

 (2) The moiré ribbon of all classes of the Order of Merit of the White Star is red (PANTONE 206 MC).

§ 39.  The Order of Merit of the White Star, Collar Class

 (1) The collar of the Order of Merit of the White Star, Collar Class is 30mm wide, made of gilt silver and consists of pieces in the form of Estonian ornamental designs, its lock a gilt badge of 38mm in diameter in the shape of the greater national coat of arms. A six point gilt star of 65mm in diameter which is covered with white enamel on both sides is suspended from the collar. The centre of the obverse side of the star bears a small six point gold star, the centre of the reverse side of the star bears the date 7. X 1936. Gold adornments project from the centre of the star into the spaces between the points (Annex 4).

 (2) The Order of Merit of the White Star, Collar Class is issued with a hexagonal gold star of 83mm in diameter, surmounted by a six point star covered with white enamel. The centre of the star bears a gilt badge of 38mm in diameter in the shape of the greater national coat of arms.

 (3) The Order of Merit of the White Star, Collar Class is issued with a sash of the Order of Merit of the White Star, First Class.

 (4) The rosette device of the Order of Merit of the White Star, Collar Class is the rosette device of the the Order of Merit of the White Star, First Class (Annex 7).

§ 40.  The Order of Merit of the White Star, First Class

 (1) The Order of Merit of the White Star, First Class consists of a sash and a silver star. The sash is a red moiré ribbon whose width is 105mm in the case of a male holder and 64mm in the case of a female holder, and from whose bow is suspended a six point White Star of 65mm in diameter (Annex 4).

 (2) The silver star is a hexagonal star of 83mm in diameter, surmounted by a six point star covered with white enamel. The centre of the star bears a gilt badge of 38mm in diameter in the shape of the greater national coat of arms.

 (3) The rosette device of the Order of Merit of the White Star, First Class is a red rosette on a gold colour base (Annex 7).

§ 41.  The Order of Merit of the White Star, Second Class

 (1) The Order of Merit of the White Star, Second Class consists of a White Star of 65mm in diameter suspended from a 41mm wide red moiré ribbon, and of a star which is identical to that of the the Order of Merit of the White Star, First Class (Annex 4).

 (2) The rosette device of the Order of Merit of the White Star, Second Class is a red rosette on a base whose left side is of silver colour and right side of gold colour (Annex 7).

§ 42.  The Order of Merit of the White Star, Third Class

 (1) The Order of Merit of the White Star, Third Class is identical to the the Order of Merit of the White Star, Second Class.except for the absence of the star (Annex 4).

 (2) The rosette device of the Order of Merit of the White Star, Third Class is a red rosette on a silver colour base (Annex 7).

§ 43.  The Order of Merit of the White Star, Fourth Class

 (1) The Order of Merit of the White Star, Fourth Class consists of a White Star of 47mm in diameter suspended from a 35mm wide red moiré ribbon. A red rosette of 22mm in diameter is affixed to the ribbon of the decoration (Annex 4).

 (2) The rosette device of the Order of Merit of the White Star, Fourth Class is a red rosette (Annex 7).

§ 44.  The Order of Merit of the White Star, Fifth Class

 (1) The Order of Merit of the White Star, Fifth Class is identical to the the Order of Merit of the White Star, Fourth Class except that the ribbon has no rosette (Annex 4).

 (2) The rosette device of the Order of Merit of the White Star, Fifth Class is a 3mm wide section of the ribbon of the decoration (Annex 7).

§ 45.  The Order of Merit of the White Star, Medal Class

 (1) The Order of Merit of the White Star, Medal Class is a circular medal decorated with Estonian ornamental designs whose diameter is 31mm and which has an adorned rim. The obverse side of the medal bears an embossed enamel image of the White Star. The reverse side of the medal bears the embossed date 7. X 1936 (Annex 4).

 (2) The ribbon of the Order of Merit of the White Star, Medal Class is a 30mm wide red moiré ribbon.

 (3) The rosette device of the Order of Merit of the White Star, Medal Class is the rosette device of the the Order of Merit of the White Star, Fifth Class (Annex 7).

Subchapter 5 Order of Merit of the Cross of the Eagle 

§ 46.  Description and ribbon of the Order of Merit of the Cross of the Eagle

 (1) The crosses of all classes of the Order of Merit of the Cross of the Eagle have the same design.

 (2) The moiré ribbon of all classes of the Order of Merit of the Cross of the Eagle is orange (PANTONE 137 MC).

 (3) All classes of the Order of Merit of the Cross of the Eagle are issued with a ribbon section which is 10mm high and 35mm wide and to which a rosette device representing the class of the decoration is affixed (Annex 7). When the Order of Merit of the Cross of the Eagle is issued as a military decoration, the device of crossed swords is added to the riband.

§ 47.  The Order of Merit of the Cross of the Eagle, First Class

 (1) The Order of Merit of the Cross of the Eagle, First Class consists of a sash and a silver star to go with the sash. The sash orange moiré ribbon whose width is 105mm in the case of a male holder and 64mm in the case of a female holder, which shows a 4mm wide blue stripe and has a 4mm wide orange hem (Annex 5).

 (2) The sash ends in a bow from which is suspended a four arm black Maltese cross of 58mm in diameter, enamelled on both sides and surrounded by a 0.5mm wide gold border. The length of the leg of the right-angled cut at the outer end of each arm of the cross is 15mm. The obverse side of the cross bears a Nordic eagle in oxidised silver who is ready to take wing and who holds a lesser national coat of arms in the talons of its left foot and a double-edged sword in the talons of its right foot. The span of the wings of the eagle is 23mm, the length of the eagle from its head to the tip of its tail feathers is 19mm and the length of the sword is 14.5mm. The reverse side of the cross bears a black enamelled circle of 10mm in diameter with a golden border and an inscription of the date 24. II 1928 running from top to bottom in the centre; the reverse side of the arms of the cross bears the motto PRO PATRIA.

 (3) The silver star is an embossed eight point star of 85mm in diameter which consists of rows of bosses surrounding the diamond-shaped centre and increasing in size from the centre outwards. The centre of the star bears the cross of the the Order of Merit of the Cross of the Eagle, Fifth Class.

§ 48.  The Order of Merit of the Cross of the Eagle, Second Class

  The Order of Merit of the Cross of the Eagle, Second Class consists of a cross and a star identical to those of the Order of Merit of the Cross of the Eagle, First Class, except that the cross is suspended from a 40mm wide orange moiré ribbon whose centreline shows a 1mm wide blue stripe and which has a 3mm wide blue stripe and a 1.5mm wide orange hem at the edges (Annex 5).

§ 49.  The Order of Merit of the Cross of the Eagle, Third Class

  The Order of Merit of the Cross of the Eagle, Third Class is identical to the Order of Merit of the Cross of the Eagle, Second Class except for the absence of the star (Annex 5).

§ 50.  The Order of Merit of the Cross of the Eagle, Fourth Class

 (1) The Order of Merit of the Cross of the Eagle, Fourth Class consists of a cross which is identical to that of the Order of Merit of the Cross of the Eagle, Third Class, except that the diameter of the cross is 50mm and the length of the leg of the right-angled cut at the outer end of each arm of the cross is 12.5mm (Annex 5).

 (2) The ribbon of the Order of Merit of the Cross of the Eagle, Fourth Class is an orange moiré ribbon which is 35mm wide and 50mm long, with a 3mm wide blue stripe and a 1.5mm wide orange hem at the edges. An orange rosette of 22 mm in diameter with blue stripes is affixed to the ribbon.

§ 51.  The Order of Merit of the Cross of the Eagle, Fifth Class

  The Order of Merit of the Cross of the Eagle, Fifth Class is identical to the Order of Merit of the Cross of the Eagle, Fourth Class except that the ribbon has no rosette (Annex 5).

§ 52.  The Medal Class of the Order of the Cross of the Eagle

 (1) The Medal Class of the Order of the Cross of the Eagle consists of the gold, silver and iron cross whose shape and size are identical to those of the cross of the Order of Merit of the Cross of the Eagle, Fifth Class but which are made of metal and lack enamel cover (Annex 5).

 (2) The ribbon of the gold, silver and iron cross of the Cross of the Eagle is a 35mm wide orange moiré ribbon with 1mm wide blue stripes in the centre as follows:
 1) the gold cross has three stripes at intervals of 2.5mm;
 2) the silver cross has two stripes at an interval of 6mm;
 3) the iron cross has one stripe.

§ 53.  The Order of Merit of the Cross of the Eagle as a military decoration

 (1) The Order of Merit of the Cross of the Eagle is a military decoration if it bears the additional device of two crossed swords added as follows:
 1) in the case of the cross, the crossed swords are fastened at their hilts to the upper tips of the top element of the cross in a way which allows them to swivel. The length of the swords together with their hilts is 35mm for the Order of Merit of the Cross of the Eagle, First, Second and Third Class and 33mm for the Fourth and Fifth Class and for the gold, silver and iron cross;
 2) in the case of the star, the crossed swords are fastened to the oblique arms of the star such that the vertical and horizontal arms remain uncovered. The hilts of the swords point downward. The length of the swords is 85mm.

 (2) The regular classes and the gold cross of the Order of Merit of the Cross of the Eagle bear gold swords, while the silver and iron cross bear swords made of the same metal as the cross.

Subchapter 6 Order of Merit of the Estonian Red Cross 

§ 54.  Description of the Order of Merit of the Estonian Red Cross

 (1) The crosses of all classes of the Order of Merit of the Estonian Red Cross have the same design.

 (2) The moiré ribbon of all classes of the Order of Merit of the Estonian Red Cross is light blue (PANTONE 297 MC).

§ 55.  The Order of Merit of the Estonian Red Cross, First Class

 (1) The Order of Merit of the Estonian Red Cross, First Class consists of a sash and a silver star. The sash is a moiré ribbon whose width is 110mm in the case of a male holder and 64mm in the case of a female holder and which has a 59mm wide blue stripe in the centre. That stripe is flanked on each side by a 6mm wide black stripe, a 7mm wide white stripe, a 2mm wide black stripe and, at the edge, a 10.5mm wide blue stripe. The sash ends in a bow from which is suspended a cross which is 41mm in diameter and the width of whose arms is 9.5mm.

 (2) The cross is bordered by a 2mm wide white enamel frame which has a 1.5mm wide gilt border. A bundle of nine gilt rays projects from between each pair of adjacent arms of the cross. The obverse side of the cross bears a stylised octagon of 24.5mm in diameter which is bordered with the colours of the Estonian flag and whose centre shows the gilt letter E on a red enamel background. The reverse side of the cross contains a red enamel circle of 22mm in diameter which has a gold colour border and bears the motto INTER ARMA CARITAS and, in the centre of the circle, the inscription 1919. The top arm of the cross ends with a 19mm high silhouette of a lighthouse. The lighthouse is covered with white enamel, stands on an ornate gilt base, and shows five gilt rays projecting to either side from the top of the lighthouse (Annex 6).

 (3) The silver star is an eight point star of 86mm in diameter with lustrous rays which trifurcate at the tip and which bear round bosses increasing in size from the centre outwards. Between each pair of the rays, there are six rows of matt silver bosses increasing in size from the pyramidal centre outwards and ending with a small rounded protuberance. The star is surmounted by a red enamel cross whose arms are 41mm long and 9.5 mm wide and which is framed by a 1.5mm wide gilt border inside which runs a 2mm wide strip of white enamel. The cross bears a stylised octagon which is 24.5mm in diameter, bordered with the colours of the Estonian flag, and bears three blue lions passant guardant on a gold colour background.

 (4) The rosette device of the Order of Merit of the Estonian Red Cross, First Class is a light blue rosette with a black and white stripe on a gold colour base (Annex 7).

§ 56.  The Order of Merit of the Estonian Red Cross, Second Class

 (1) The Order of Merit of the Estonian Red Cross, Second Class consists of a star and an enamelled cross with arms of equal length which are identical respectively to the star and the cross of the Order of Merit of the Estonian Red Cross, First Class (Annex 6).

 (2) The ribbon of the Order of Merit of the Estonian Red Cross, Second Class is a 40mm wide moiré ribbon with a 21mm wide blue stripe in the centre. That stripe is flanked on each side by a 2mm wide black stripe, a 2.5mm wide white stripe, a 1mm wide black stripe and, at the edge, a 4mm wide blue stripe.

 (3) The rosette device of the Order of Merit of the Estonian Red Cross, Second Class is a light blue rosette with a black and white stripe on a base whose right side of which is of gold colour and left side of silver colour (Annex 7).

§ 57.  The Order of Merit of the Estonian Red Cross, Third Class

 (1) The Order of Merit of the Estonian Red Cross, Third Class is identical to the Order of Merit of the Estonian Red Cross, Second Class except for the absence of the star (Annex 6).

 (2) The rosette device of the Order of Merit of the Estonian Red Cross, Third Class is a light blue rosette with a black and white stripe on a silver colour base (Annex 7).

§ 58.  The Order of Merit of the Estonian Red Cross, Fourth Class

 (1) The cross of the Order of Merit of the Estonian Red Cross, Fourth Class is identical to that of the Order of Merit of the Estonian Red Cross, Second Class except that its diameter is 38mm (Annex 6).

 (2) The ribbon of the of the Order of Merit of the Estonian Red Cross, Fourth Class is a 36mm wide moiré ribbon with a 19mm wide blue stripe in the centre. That stripe is flanked on each side by a 2mm wide black stripe, a 2.5mm wide white stripe, a 0.5mm wide black stripe and, at the edge, a 3.5mm wide blue stripe. A rosette of 22mm in diameter is affixed to the ribbon of the Order of Merit of the Estonian Red Cross, Fourth Class.

 (3) The rosette device of the Order of Merit of the Estonian Red Cross, Fourth Class is a light blue rosette with a black and white stripe (Annex 7).

§ 59.  The Order of Merit of the Estonian Red Cross, Fifth Class

 (1) The Order of Merit of the Estonian Red Cross, Fifth Class is identical to the Order of Merit of the Estonian Red Cross, Fourth Class except that the ribbon has no rosette (Annex 6).

 (2) The rosette device of the Order of Merit of the Estonian Red Cross, Fifth Class is a 3mm wide section of the ribbon of the decoration (Annex 7).

§ 60.  The Order of Merit of the Estonian Red Cross, Medal Class

 (1) The Order of Merit of the Estonian Red Cross, Medal Class is a circular silver medal of 29mm in diameter. The obverse side of the medal bears an embossed image of an enamel red cross of 13.5mm whose arms are 3mm wide and of equal length. The reverse side of the medal bears the embossed inscription EESTI PUNANE RIST [the Estonian Red Cross] (Annex 6).

 (2) The ribbon of the Order of Merit of the Estonian Red Cross, Medal Class is identical to that of the Order of Merit of the Estonian Red Cross, Fifth Class.

 (3) The rosette device of the Order of Merit of the Estonian Red Cross, Medal Class is the rosette device of the Order of Merit of the Estonian Red Cross, Fifth Class.

Subchapter 7 Miniature version of a decoration 

§ 61.  Description of the miniature version of a decoration

 (1) The miniature version of a decoration is a reduced size replica of the decoration’s fifth class device, the diameter of the replica being 17mm and the width of the ribbon 15mm. The height of the miniature version inclusive of the ribbon is 50mm.

 (2) The miniature version of the medal class device of a decoration is a replica of the decoration which has been reduced in size to match the dimensions of the miniature version of the regular class device of the decoration.

 (3) The rosette device of the relevant class of the decoration is attached 10mm above the lower edge of the ribbon of the miniature version of the decoration to mark the class of the decoration.

Chapter 4 REGISTER OF DECORATIONS 

§ 62.  Register of decorations

 (1) The Office of the President of the Republic keeps a register of decorations in order to ensure an orderly overview of the persons on whom the President of the Republic has bestowed a decoration and of the Estonian citizens on whom a foreign government has bestowed an order of honour or order of merit, of the decorations bestowed upon these persons and citizens, and of the availability of the relevant information to the persons and agencies entitled to access it.

 (2) The register of decorations is established and its constitutive regulations are adopted by a regulation of the Government of the Republic.
[RT I, 16.04.2014, 1 - entry into force 26.04.2014]

§ 63.  Entry of data concerning decorations in register

  In accordance with the corresponding resolution of the President of the Republic, the Office of the President of the Republic enters in the register the particulars specified in subsection 4 of section 11 of this Act and the name and class of the decoration bestowed, the dates of the bestowal and presentation of the decoration as well as any particulars concerning withdrawal of the decoration.

§ 64.  Registration of foreign orders of honour and orders of merit

 (1) Within a reasonable period of time after the bestowal, by a foreign government, of an order of honour or order of merit on an Estonian citizen, the citizen must submit an application to the Office of the President of the Republic to have the decoration recorded in the register of decorations. A copy of the certificate of the order of honour or order of merit is enclosed with the application.

 (2) An order of honour or order of merit bestowed by a foreign government on an Estonian citizen may be recorded by the Office of the President of the Republic in the register of decorations without the holder’s application, provided the bestowal of the order is known to the Office.

Chapter 5 MINIATURE VERSION OF A DECORATION AND AN ADDITIONAL ROSETTE DEVICE 

§ 65.  Obtaining a miniature version of a decoration and an additional rosette device

 (1) The holder of a decoration is entitled to apply to the Office of the President of the Republic for a miniature version of the decoration and an additional rosette device to be issued to him or her in addition to the decoration bestowed.

 (2) The application is submitted to the Office of the President of the Republic. Before submitting the application, the state fee in the amount provided in the State Fees Act must be paid.

 (3) The Office of the President of the Republic decides the grant of the application within 30 days from receiving the application and issues the holder of the decoration with the items applied for within a reasonable period of time.

Chapter 6 LIABILITY 

§ 66.  Making, wearing and other use of national decorations by persons who lack the corresponding entitlement
[Repealed – RT I, 12.07.2014, 1 - entry into force 01.01.2015]

§ 67.  Illegal handling of national decorations
[RT I, 12.07.2014, 1 - entry into force 01.01.2015]

 (1) The purchase, sale, exchange or other transfer for a charge of a national decoration, as well as the wearing of the decoration by a person who is not entitled to do so, –
is punishable by a fine of up to 300 fine units.
[RT I, 12.07.2014, 1 - entry into force 01.01.2015]

 (2) The same act, when committed by a legal person, is punishable by a fine of up to 2000 euros.
[RT I 2010, 22, 108 - entry into force 01.01.2011]

§ 68.  Non-respect of national decorations

 (1) Demolishing, defiling, defaming or otherwise using a state decoration in an undignified manner is punishable by a fine of up to 300 fine units.

 (2) The same act, when committed by a legal person, is punishable by a fine of up to 2000 euros.
[RT I 2010, 22, 108 - entry into force 01.01.2011]

§ 69.  Acts concerning objects whose similarity to national decorations is such as to render them likely to be confused with those decorations

 (1) The making, wearing or other use of an object whose similarity to a national decoration is such as to render it likely to be confused with that decoration is punishable by a fine of up to 300 fine units.

 (2) The same act, when committed by a legal person, is punishable by a fine of up to 2000 euros.
[RT I 2010, 22, 108 - entry into force 01.01.2011]

§ 70.  Procedure

  Extrajudicial proceedings in matters of the misdemeanours defined in this Chapter are conducted by the Police and Border Guard Board.
[RT I, 12.07.2014, 1 - entry into force 01.01.2015]

Chapter 7 IMPLEMENTING PROVISIONS 

§ 71.  Retroactive bestowal of the Order of Merit of the National Coat of Arms, Collar Class

  President Lennart Georg Meri and President Arnold Rüütel are holders of the Order of Merit of the National Coat of Arms, Collar Class.

§ 72.  Transfer of clerical files

  The Government Office is to transfer the clerical files related to the bestowal of decorations to the Office of the President of the Republic within one month following the entry into force of this Act. Any recommendations which have been submitted are deemed proposals to bestow a decoration.

§ 73. – § 75. [Omitted from this text]

§ 76.  Entry into force of Act

 (1) This Act enters into force on 1 March 2008.

 (2) Subsection 2 of section 4 and section 71 of this Act enter into force on 23 February 2008.

 (3) Section 74 of this Act enters into force in accordance with standard procedure.

Väljaandja:Riigikogu
Akti liik:seadus
Teksti liik:terviktekst
Redaktsiooni jõustumise kp:01.01.2015
Redaktsiooni kehtivuse lõpp: Hetkel kehtiv
Avaldamismärge:RT I, 12.07.2014, 137

1. peatükk ÜLDSÄTTED 

§ 1.  Seaduse reguleerimisala

  (1) Käesoleva seadusega kehtestatakse Vabariigi Presidendi poolt antavad riiklikud autasud (edaspidi teenetemärgid), sätestatakse nende klassid ja kirjeldus ning teenetemärkide andmise ja kandmise, äravõtmise ja tagastamise kord, au- ja teenetemärkide registreerimise kord ning vastutus seaduse rikkumise eest.

  (2) Käesolevas seaduses ettenähtud haldusmenetlusele kohaldatakse haldusmenetluse seaduse sätteid, arvestades käesoleva seaduse erisusi.

§ 2.  Riiklikud teenetemärgid

  (1) Teenetemärgid on:
  1) Vabadusristi aumärk;
  2) Riigivapi teenetemärk;
  3) Maarjamaa Risti teenetemärk;
  4) Valgetähe teenetemärk;
  5) Kotkaristi teenetemärk;
  6) Eesti Punase Risti teenetemärk.

  (2) Teenetemärgiga äravahetamiseni sarnase teenete-, au- või muu märgi kehtestamine, valmistamine ja kasutamine on keelatud.

§ 3.  Vabadusristi aumärk

  (1) Vabadusristi aumärk on asutatud 1919. aastal Vabadussõja-aegsete teenete tunnustamiseks. Vabadusristi aumärk on sõjaline teenetemärk Eesti iseseisvuse kaitsmiseks peetava sõja puhul.

  (2) Vabadusristi aumärgil on kolm liiki:
  1) I liik – antakse sõjaväeliste teenete tunnustamiseks Eesti riigi kaitseks peetavas sõjas;
  2) II liik – antakse isikliku vapruse tunnustamiseks Eesti riigi kaitseks peetavas sõjas;
  3) III liik – antakse administratiiv- ja tsiviilteenete tunnustamiseks Eesti riigi kaitseks peetavas sõjas.

  (3) Vabadusristi andmine lõpetati 1925. aasta 19. juuni seadusega. Vabadusristi võib uuesti anda Eesti iseseisvuse kaitsmiseks peetava sõja puhul alates sõjaseisukorra väljakuulutamisest kuni Vabadusristi andmise lõpetamiseks vastu võetava seaduse jõustumiseni.

§ 4.  Riigivapi teenetemärk

  (1) Riigivapi teenetemärk on asutatud 1936. aastal Eesti iseseisvuse väljakuulutamise päeva – 1918. aasta 24. veebruari mälestamiseks. Riigivapi teenetemärk antakse ainult Eesti kodanikule kõrgeima teenetemärgina riigile osutatud teenete tunnustamiseks.

  (2) Vabariigi President on Riigivapi ketiklassi teenetemärgi kavaler. Teenetemärgi kett antakse edasi koos Vabariigi Presidendi ametiga.

§ 5.  Maarjamaa Risti teenetemärk

  Maarjamaa Risti teenetemärk on asutatud 1995. aastal Eesti riigi iseseisvuse auks. Maarjamaa Risti teenetemärk antakse välismaalastele kõrgeima teenetemärgina Eesti riigile osutatud teenete tunnustamiseks.

§ 6.  Valgetähe teenetemärk

  Valgetähe teenetemärk on asutatud 1936. aastal Eesti rahva vabadusvõitluse mälestamiseks. Valgetähe teenetemärk antakse riigiteenistuses või kohaliku omavalitsuse teenistuses olevatele isikutele, samuti majanduse, hariduse, teaduse, kultuuri või spordi alal osutatud või muude üldkasulike teenete ning saavutuste tunnustamiseks.

§ 7.  Kotkaristi teenetemärk

  Kotkaristi teenetemärk on asutatud 1928. aastal Kaitseliidu poolt Eesti iseseisvuse 10. aastapäevaks. Kotkaristi teenetemärk antakse sõjaliste ja riigikaitseliste teenete tunnustamiseks.

§ 8.  Eesti Punase Risti teenetemärk

  Eesti Punase Risti teenetemärk on asutatud 1920. aastal Eesti Punase Risti Seltsi poolt. Eesti Punase Risti teenetemärk antakse Eesti rahva huvides tervishoiu ja sotsiaalalal osutatud teenete tunnustamiseks ning elu päästmise eest.

§ 9.  Teenetemärgi kavaler

  (1) Teenetemärgi võib anda Eesti kodanikule ja välismaalasele.

  (2) Teenetemärgi võib anda ka postuumselt.

  (3) Teenetemärgi võib anda lahinguliste teenete eest ka väeüksusele või allüksusele.
[RT I 2008, 35, 213 - jõust. 01.01.2009]

  (4) Isikut, kellelt on teenetemärk ära võetud, ei loeta teenetemärgi kavaleriks.

2. peatükk TEENETEMÄRGI ANDMINE, KANDMINE JA ÄRAVÕTMINE 

§ 10.  Teenetemärgi andmine

  (1) Teenetemärkide korraline andmine toimub üks kord aastas – 24. veebruariks, iseseisvuspäevaks.

  (2) Erandjuhtudel, sealhulgas riigivisiidi puhul või Eestisse akrediteeritud diplomaadi lahkumisel riigist tema ametiaja lõppemise korral, samuti postuumselt võib teenetemärgi anda ka muul ajal.

  (3) Isikule, kellele on antud teenetemärk, võib rahuajal samalaadsete teenete eest uuesti teenetemärgi anda üldjuhul pärast viie ja erilaadsete teenete eest üldjuhul pärast kolme aasta möödumist eelmise teenetemärgi andmise otsuse tegemisest.

  (4) Enne välismaalasele teenetemärgi andmist kuulab Vabariigi President ära valdkonna eest vastutava ministri arvamuse.

  (5) Teenetemärk koos tunnistusega antakse tasuta.

  (6) Teenetemärkide andmist ja sellega seonduvat korraldab Vabariigi Presidendi Kantselei.

§ 11.  Teenetemärgi andmise ettepanekud

  (1) Igaühel, samuti igal asutusel ja institutsioonil, on õigus esitada Vabariigi Presidendile ettepanek teenetemärgi andmiseks. Vabariigi Presidendi Kantselei teavitab ettepaneku tegijat selle kättesaamisest.

  (2) Ettepanekud iseseisvuspäevaks teenetemärgi andmise kohta esitatakse Vabariigi Presidendile teenetemärkide andmisele eelneva aasta 1. novembriks.

  (3) Vabariigi President vaatab teenetemärgi andmise ettepanekud läbi ja otsustab teenetemärkide andmise. Ettepaneku alusel teenetemärgi andmata jätmist ei pea põhjendama.

  (4) Teenetemärgi andmise ettepanek peab sisaldama selle isiku nime, sünniaega ja teene kirjeldust, kelle suhtes ettepanek tehakse.

  (5) Teave teenetemärgi andmise ettepaneku kohta tunnistatakse asutusesiseseks kasutamiseks mõeldud teabeks viieks aastaks alates ettepaneku saamisest.

§ 12.  Teenetemärgi kandmine

  (1) Teenetemärki võib kanda üksnes isik, kellele Vabariigi President on teenetemärgi andnud ja kellelt ei ole seda ära võetud.

  (2) Teenetemärki kantakse kooskõlas teenetemärkide kandmise hea tavaga. Teenetemärkide kandmise hea tava kohta annab selgitusi Vabariigi Presidendi Kantselei.

§ 13.  Teenetemärgi äravõtmine ja tagastamine

  (1) Vabariigi President võib otsustada isikult teenetemärk ära võtta, kui:
  1) on jõustunud kohtuotsus, millega isik on süüdi mõistetud tahtliku kuriteo toimepanemises, või
  2) saavad teatavaks enne teenetemärgi andmist esinenud asjaolud, millest teadmise korral ei oleks isikule teenetemärki antud, või
  3) isiku hilisem käitumine on olnud niivõrd vääritu, et see välistaks talle teenetemärgi andmise.

  (2) Isik, kellelt Vabariigi President on oma otsusega teenetemärgi ära võtnud, peab teenetemärgi tagastama Vabariigi Presidendi Kantseleile.

3. peatükk TEENETEMÄRKIDE KLASSID JA KIRJELDUS 

1. jagu Vabadusristi aumärk 

§ 14.  Vabadusristi aumärgi järgud

  Iga Vabadusristi aumärgi liik jaguneb kolme järku.

§ 15.  Vabadusristi I liigi 1. järk

  (1) Vabadusristi I liigi 1. järgu aumärgi rist on 45 mm kõrgune ja 39 mm laiune reljeefne valge emailiga kaetud kuldse äärisega ladina rist. Risti harud on 9 mm laiused, nende otsad laienevad T-kujuliseks. Harude keskjoonel on 1 mm laiune kuldne triip. Risti südamikus paikneb kuldse äärisega must sõõr, millel on kuldsed täht «E» ja käsivars mõõgaga, ning risti tagaküljel sama suur kuldse äärisega must sõõr kuldses kirjas kuupäevaga «24. II 1919» (lisa 1).

  (2) Aumärgi lint on 30 mm laiune must muareelint, mille mõlemal äärel on 7 mm laiune sinine (PANTONE 285 C) ja 8 mm laiune valge triip.

§ 16.  Vabadusristi I liigi 2. järk

  (1) Vabadusristi I liigi 2. järgu aumärgi rist on 39 mm kõrgune ja 34 mm laiune reljeefne valge emailiga kaetud hõbedase äärisega ladina rist. Risti harud on 8 mm laiused, nende otsad laienevad T-kujuliseks. Harude keskjoonel on 1 mm laiune hõbedane triip. Risti südamikus paikneb hõbedase äärisega must sõõr, millel on hõbedased täht «E» ja käsivars mõõgaga, ning risti tagaküljel sama suur hõbedase äärisega must sõõr hõbedases kirjas kuupäevaga «24. II 1919» (lisa 1).

  (2) Aumärgi lint on 30 mm laiune must muareelint, mille mõlemal äärel on 7 mm laiune sinine (PANTONE 285 C) ja 8 mm laiune valge triip.

§ 17.  Vabadusristi I liigi 3. järk

  (1) Vabadusristi I liigi 3. järgu aumärgi rist on 36 mm kõrgune ja 30 mm laiune reljeefne valge emailiga kaetud oksüdeeritud metallist äärisega ladina rist. Risti harud on 7 mm laiused, nende otsad laienevad T-kujuliseks. Harude keskjoonel on 1 mm laiune hõbedane triip. Risti südamikus paikneb hõbedase äärisega must sõõr, millel on hõbedased täht «E» ja käsivars mõõgaga, ning risti tagaküljel sama suur hõbedase äärisega must sõõr hõbedases kirjas kuupäevaga «24. II 1919» (lisa 1).

  (2) Aumärgi lint on 30 mm laiune must muareelint, mille mõlemal äärel on 7 mm laiune sinine (PANTONE 285 C) ja 8 mm laiune valge triip.

§ 18.  Vabadusristi II liigi 1. järk

  (1) Vabadusristi II liigi 1. järgu aumärgi rist on 45 mm kõrgune ja 39 mm laiune reljeefne musta emailiga kaetud kuldse äärisega ladina rist. Risti harud on 9 mm laiused, nende otsad laienevad T-kujuliseks. Harude keskjoonel on 1 mm laiune kuldne triip. Risti südamikus paikneb kuldse äärisega punane sõõr, millel on kuldsed täht «E» ja käsivars mõõgaga, ning risti tagaküljel sama suur kuldse äärisega punane sõõr kuldses kirjas kuupäevaga «24. II 1919» (lisa 1).

  (2) Aumärgi lint on 30 mm laiune sinine (PANTONE 285 C) muareelint, mille mõlemal äärel on 7 mm laiune must ja 8 mm laiune valge triip.

§ 19.  Vabadusristi II liigi 2. järk

  (1) Vabadusristi II liigi 2. järgu aumärgi rist on 39 mm kõrgune ja 34 mm laiune reljeefne musta emailiga kaetud hõbedase äärisega ladina rist. Risti harud on 8 mm laiused, nende otsad laienevad T-kujuliseks. Harude keskjoonel on 1 mm laiune hõbedane triip. Risti südamikus paikneb hõbedase äärisega punane sõõr, millel on hõbedased täht «E» ja käsivars mõõgaga, ning risti tagaküljel sama suur hõbedase äärisega punane sõõr hõbedases kirjas kuupäevaga «24. II 1919» (lisa 1).

  (2) Aumärgi lint on 30 mm laiune sinine (PANTONE 285 C) muareelint, mille mõlemal äärel on 7 mm laiune must ja 8 mm laiune valge triip.

§ 20.  Vabadusristi II liigi 3. järk

  (1) Vabadusristi II liigi 3. järgu aumärgi rist on 36 mm kõrgune ja 30 mm laiune oksüdeeritud rauast ladina rist. Risti harud on 7 mm laiused, nende otsad laienevad T-kujuliseks. Risti südamikus paikneb hõbedase äärisega punane sõõr, millel on hõbedased täht «E» ja käsivars mõõgaga, ning risti tagaküljel sama suur hõbedase äärisega punane sõõr kuldses kirjas kuupäevaga «24. II 1919» (lisa 1).

  (2) Aumärgi lint on 30 mm laiune sinine (PANTONE 285 C) muareelint, mille mõlemal äärel on 7 mm laiune must ja 8 mm laiune valge triip.

§ 21.  Vabadusristi III liigi 1. järk

  (1) Vabadusristi III liigi 1. järgu aumärgi rist on 45 mm kõrgune ja 39 mm laiune reljeefne sinise emailiga kaetud kuldse äärisega ladina rist. Risti harud on 9 mm laiused, nende otsad laienevad T-kujuliseks. Harude keskjoonel on 1 mm laiune kuldne triip. Risti südamikus paikneb kuldse äärisega valge sõõr, millel on must täht «E», ning risti tagaküljel sama suur kuldse äärisega valge sõõr mustas kirjas kuupäevaga «24. II 1919» (lisa 1).

  (2) Aumärgi lint on 30 mm laiune valge muareelint, mille mõlemal äärel on 7 mm laiune sinine (PANTONE 285 C) ja 8 mm laiune must triip.

§ 22.  Vabadusristi III liigi 2. järk

  (1) Vabadusristi III liigi 2. järgu aumärgi rist on 39 mm kõrgune ja 34 mm laiune reljeefne sinise emailiga kaetud hõbedase äärisega ladina rist. Risti harud on 8 mm laiused, nende otsad laienevad T-kujuliseks. Harude keskjoonel on 1 mm laiune hõbedane triip. Risti südamikus paikneb hõbedase äärisega valge sõõr, millel on must täht «E», ning risti tagaküljel sama suur hõbedase äärisega valge sõõr mustas kirjas kuupäevaga «24. II 1919» (lisa 1).

  (2) Aumärgi lint on 30 mm laiune valge muareelint, mille mõlemal äärel on 7 mm laiune sinine (PANTONE 285 C) ja 8 mm laiune must triip.

§ 23.  Vabadusristi III liigi 3. järk

  (1) Vabadusristi III liigi 3. järgu aumärgi rist on 36 mm kõrgune ja 30 mm laiune reljeefne sinise emailiga kaetud oksüdeeritud metallist äärisega ladina rist. Risti harud on 7 mm laiused, nende otsad laienevad T-kujuliseks. Harude keskjoonel on 1 mm laiune hõbedane triip. Risti südamikus paikneb hõbedase äärisega valge sõõr, millel on must täht «E», ning risti tagaküljel sama suur hõbedase äärisega valge sõõr mustas kirjas kuupäevaga «24. II 1919» (lisa 1).

  (2) Aumärgi lint on 30 mm laiune valge muareelint, mille mõlemal äärel on 7 mm laiune sinine (PANTONE 285 C) ja 8 mm laiune must triip.

2. jagu Riigivapi teenetemärk 

§ 24.  Riigivapi teenetemärgi kirjeldus

  (1) Riigivapi kõikide klasside teenetemärkide mõlemalt poolt kullatud suure riigivapi kujulise ripatsi tagaküljel on reljeefsete numbritega kuupäev «24. II 1918».

  (2) Riigivapi kõikide klasside teenetemärkide muareelint on sinine (PANTONE 285 C).

§ 25.  Riigivapi ketiklassi teenetemärk

  (1) Riigivapi ketiklassi teenetemärgi kett on Eesti ornamentkaunistusega 30 mm laiune kuldkett. Keti nelja kaunistuse südamikku on paigutatud vääriskivid. Keti küljes ripub 69 mm läbimõõduga kullatud suure riigivapi kujuline ripats (lisa 2).

  (2) Riigivapi ketiklassi teenetemärgi juurde kuulub kaheksaharuline 87 mm läbimõõduga kuldtäht, mille keskel on 42 mm läbimõõduga suure riigivapi kujuline märk.

  (3) Riigivapi ketiklassi teenetemärgi juurde kuulub erisuurpael, mis on meestel 105 mm ja naistel 64 mm laiune sinine muareelint 5 mm kuldse äärisega, mille põiksõlme küljes ripub 58 mm läbimõõduga kullatud suure riigivapi kujuline ripats.

  (4) Riigivapi ketiklassi teenetemärgi rosettmärgiks on I klassi rosettmärk (lisa 7).

§ 26.  Riigivapi I klassi teenetemärk

  (1) Riigivapi I klassi teenetemärk koosneb suurpaelast ja selle juurde kuuluvast hõbetähest. Suurpael on meestel 105 mm ja naistel 64 mm laiune sinine muareelint, mille põiksõlme küljes ripub 58 mm läbimõõduga kullatud suure riigivapi kujuline ripats (lisa 2).

  (2) Hõbetäht on 87 mm läbimõõduga kaheksaharuline täht, mille keskel on 38 mm läbimõõduga kullatud suure riigivapi kujuline märk.

  (3) Riigivapi I klassi teenetemärgi rosettmärk on sinine rosett kuldsel alusel (lisa 7).

§ 27.  Riigivapi II klassi teenetemärk

  (1) Riigivapi II klassi teenetemärk koosneb 41 mm laiuse sinise muareelindi küljes rippuvast 55 mm läbimõõduga kullatud suure riigivapi kujulisest ripatsist ja selle juurde kuuluvast samasugusest tähest nagu I klassi teenetemärgil (lisa 2).

  (2) Riigivapi II klassi teenetemärgi rosettmärk on sinine rosett alusel, mille vasak pool on hõbedane ja parem pool kuldne (lisa 7).

§ 28.  Riigivapi III klassi teenetemärk

  (1) Riigivapi III klassi teenetemärk on samasugune nagu II klassi teenetemärk, kuid puudub täht (lisa 2).

  (2) Riigivapi III klassi teenetemärgi rosettmärk on sinine rosett hõbedasel alusel (lisa 7).

§ 29.  Riigivapi IV klassi teenetemärk

  (1) Riigivapi IV klassi teenetemärk on 35 mm laiuse sinise muareelindi küljes rippuv 42 mm läbimõõduga kullatud suure riigivapi kujuline ripats. Teenetemärgi lindile on paigutatud 22 mm läbimõõduga sinine rullmärk (lisa 2).

  (2) Riigivapi IV klassi teenetemärgi rosettmärk on sinine rosett (lisa 7).

§ 30.  Riigivapi V klassi teenetemärk

  (1) Riigivapi V klassi teenetemärk on samasugune nagu IV klassi teenetemärk, kuid lindil puudub rullmärk (lisa 2).

  (2) Riigivapi V klassi teenetemärgi rosettmärk on teenetemärgi lindi 3 mm laiune riba (lisa 7).

3. jagu Maarjamaa Risti teenetemärk 

§ 31.  Maarjamaa Risti teenetemärgi kirjeldus

  (1) Maarjamaa Risti kõikide klasside teenetemärkide ristid koos kilbiga on ühesuuruse ja ühesuguse kujundusega, välja arvatud keti lülideks olevad ristid.

  (2) Maarjamaa Risti kõikide klasside teenetemärkide muareelint on sinine (PANTONE 300 C).

§ 32.  Maarjamaa Risti ketiklassi teenetemärk

  (1) Maarjamaa Risti ketiklassi teenetemärgi kett on 22 mm laiune hõbekett, mis koosneb kaheteistkümnest Maarja monogrammist, kuuest kullatud põhjaga gooti kilbist, millel on kolm emailitud sinist lõvi ja kuuest 22 mm läbimõõduga Maarjamaa Ristist. Keti lukuks on gooti kilp, mille külge on kinnitatud Maarjamaa Rist (lisa 3).

  (2) Maarjamaa Rist on hõbedast, mõlemalt poolt valge emailiga kaetud 48 mm läbimõõduga käpprist, mille harud on mõlemalt poolt ääristatud 2 mm laiuse sinise ja musta emailitud triibuga. Risti tagaküljel on kiri «PRO TERRA MARIANA». Risti harude vahel paiknevad Maarja monogrammid.

  (3) Maarjamaa Risti ketiklassi teenetemärgi juurde kuulub kaheksaharuline 80 mm läbimõõduga hõbetäht. Sellele on kinnitatud 48 mm läbimõõduga Maarjamaa Rist, mille keskele on paigutatud kolme sinise lõviga kuldne gooti kilp, mille läbimõõt on 16 mm.

  (4) Maarjamaa Risti ketiklassi teenetemärgi juurde kuulub I klassi teenetemärgi suurpael, mis on meestel 105 mm ja naistel 64 mm laiune sinine muareelint. Põiksõlme küljes ripub kolme sinise lõviga kuldne gooti kilp, millele kinnitub Maarjamaa Rist.

  (5) Maarjamaa Risti ketiklassi teenetemärgi juurde kuulub I klassi rosettmärk (lisa 7).

§ 33.  Maarjamaa Risti I klassi teenetemärk

  (1) Maarjamaa Risti I klassi teenetemärk koosneb suurpaelast ja selle juurde kuuluvast hõbetähest. Suurpael on meestel 105 mm ja naistel 64 mm laiune sinine muareelint. Selle põiksõlme küljes ripub kolme sinise lõviga kuldne gooti kilp, millele kinnitub Maarjamaa Rist (lisa 3).

  (2) Hõbetäht on samasugune nagu Maarjamaa Risti ketiklassi teenetemärgi juurde kuuluv hõbetäht.

  (3) Maarjamaa Risti I klassi teenetemärgi rosettmärk on sinine rosett kuldsel alusel (lisa 7).

§ 34.  Maarjamaa Risti II klassi teenetemärk

  (1) Maarjamaa Risti II klassi teenetemärk koosneb 40 mm laiuse sinise muareelindi külge kinnitatud kolme sinise lõviga kuldsest gooti kilbist, millele kinnitub Maarjamaa Rist, ning selle juurde kuuluvast samasugusest hõbetähest nagu ketiklassi teenetemärgil (lisa 3).

  (2) Maarjamaa Risti II klassi teenetemärgi rosettmärk on sinine rosett alusel, mille vasak pool on hõbedane ja parem pool kuldne (lisa 7).

§ 35.  Maarjamaa Risti III klassi teenetemärk

  (1) Maarjamaa Risti III klassi teenetemärk on samasugune nagu II klassi teenetemärk, kuid puudub täht (lisa 3).

  (2) Maarjamaa Risti III klassi teenetemärgi rosettmärk on sinine rosett hõbedasel alusel (lisa 7).

§ 36.  Maarjamaa Risti IV klassi teenetemärk

  (1) Maarjamaa Risti IV klassi teenetemärk on 35 mm laiuse sinise muareelindi külge kinnitatud kolme sinise lõviga kuldne gooti kilp, millele kinnitub Maarjamaa Rist. Teenetemärgi lindile on paigutatud 22 mm läbimõõduga sinine rullmärk (lisa 3).

  (2) Maarjamaa Risti IV klassi teenetemärgi rosettmärk on sinine rosett (lisa 7).

§ 37.  Maarjamaa Risti V klassi teenetemärk

  (1) Maarjamaa Risti V klassi teenetemärk on samasugune nagu IV klassi teenetemärk, kuid lindil puudub rullmärk (lisa 3).

  (2) Maarjamaa Risti V klassi teenetemärgi rosettmärk on teenetemärgi lindi 3 mm laiune riba (lisa 7).

4. jagu Valgetähe teenetemärk 

§ 38.  Valgetähe teenetemärgi kirjeldus

  (1) Valgetähe kõikide klasside teenetemärkide tähed on ühesuguse kujunduse, kuid eri mõõtmetega.

  (2) Valgetähe kõikide klasside teenetemärkide muareelint on punane (PANTONE 206 MC).

§ 39.  Valgetähe ketiklassi teenetemärk

  (1) Valgetähe ketiklassi teenetemärgi kett on Eesti ornamentkaunistusega 30 mm laiune kullatud hõbekett, mille lukuks on 38 mm läbimõõduga kullatud suure riigivapi kujuline märk. Keti külge on kinnitatud kuueharuline mõlemalt poolt valge emailiga kaetud kullatud täht, mille läbimõõt on 65 mm. Tähe esikülje südamikus on kuueharuline väike kuldtäht, tagakülje südamikus on kuupäev «7. X 1936». Tähe südamikust väljuvad harudevahelised kuldkaunistused (lisa 4).

  (2) Valgetähe ketiklassi teenetemärgi juurde kuulub kuuekandiline 83 mm läbimõõduga kuldtäht, millele on kinnitatud kuueharuline valge emailiga kaetud täht. Tähe südamikku on paigutatud 38 mm läbimõõduga kullatud suure riigivapi kujuline märk.

  (3) Valgetähe ketiklassi teenetemärgi juurde kuulub I klassi suurpael.

  (4) Valgetähe ketiklassi teenetemärgi rosettmärgiks on I klassi rosettmärk (lisa 7).

§ 40.  Valgetähe I klassi teenetemärk

  (1) Valgetähe I klassi teenetemärk koosneb suurpaelast ja selle juurde kuuluvast hõbetähest. Suurpael on meestel 105 mm ja naistel 64 mm laiune punane muareelint, mille põiksõlme küljes ripub 65 mm läbimõõduga kuueharuline valgetäht (lisa 4).

  (2) Hõbetäht on 83 mm läbimõõduga kuuekandiline täht, millele on kinnitatud kuueharuline valge emailiga kaetud täht. Tähe südamikku on paigutatud 38 mm läbimõõduga kullatud suure riigivapi kujuline märk.

  (3) Valgetähe I klassi teenetemärgi rosettmärk on punane rosett kuldsel alusel (lisa 7).

§ 41.  Valgetähe II klassi teenetemärk

  (1) Valgetähe II klassi teenetemärk koosneb 41 mm laiuse punase muareelindi küljes rippuvast 65 mm läbimõõduga valgetähest ning selle juurde kuuluvast samasugusest tähest nagu I klassi teenetemärgil (lisa 4).

  (2) Valgetähe II klassi teenetemärgi rosettmärk on punane rosett alusel, mille vasak pool on hõbedane ja parem pool kuldne (lisa 7).

§ 42.  Valgetähe III klassi teenetemärk

  (1) Valgetähe III klassi teenetemärk on samasugune nagu II klassi teenetemärk, kuid puudub täht (lisa 4).

  (2) Valgetähe III klassi teenetemärgi rosettmärk on punane rosett hõbedasel alusel (lisa 7).

§ 43.  Valgetähe IV klassi teenetemärk

  (1) Valgetähe IV klassi teenetemärk on 35 mm laiuse punase muareelindi küljes rippuv 47 mm läbimõõduga valgetäht. Teenetemärgi lindile on paigutatud 22 mm läbimõõduga punane rullmärk (lisa 4).

  (2) Valgetähe IV klassi teenetemärgi rosettmärk on punane rosett (lisa 7).

§ 44.  Valgetähe V klassi teenetemärk

  (1) Valgetähe V klassi teenetemärk on samasugune nagu IV klassi teenetemärk, kuid lindil puudub rullmärk (lisa 4).

  (2) Valgetähe V klassi teenetemärgi rosettmärk on teenetemärgi lindi 3 mm laiune riba (lisa 7).

§ 45.  Valgetähe medaliklassi teenetemärk

  (1) Valgetähe medaliklassi teenetemärgi medal on sõõrikujuline, Eesti ornamentkaunistusega, väljatöötatud kannaga hõbemedal, mille läbimõõt on 31 mm. Medali esiküljel on reljeefne emailitud valgetähe kujutis. Medali tagaküljel on reljeefsete numbritega kuupäev «7. X 1936» (lisa 4).

  (2) Valgetähe medaliklassi teenetemärgi lint on 30 mm laiune punane muareelint.

  (3) Valgetähe medaliklassi teenetemärgi rosettmärgiks on V klassi rosettmärk (lisa 7).

5. jagu Kotkaristi teenetemärk 

§ 46.  Kotkaristi teenetemärgi kirjeldus ja lindilõige

  (1) Kotkaristi kõikide klasside teenetemärkide ristid on ühesuguse kujundusega.

  (2) Kotkaristi kõikide klasside teenetemärkide muareelint on oranž (PANTONE 137 MC).

  (3) Kotkaristi kõikide klasside teenetemärkide juurde kuulub 10 mm kõrgune ja 35 mm laiune lindilõige, millele on kinnitatud teenetemärgi klassi tähistav rosettmärk (lisa 7). Kotkaristi sõjaliste teenetemärkide lindilõikeile on lisatud ristuvad mõõgad.

§ 47.  Kotkaristi I klassi teenetemärk

  (1) Kotkaristi I klassi teenetemärk koosneb suurpaelast ja selle juurde kuuluvast hõbetähest. Suurpael on meestel 105 mm ja naistel 64 mm laiune oranž muareelint 4 mm laiuse sinise triibuga ja 4 mm laiuse oranži kandiga (lisa 5).

  (2) Suurpael lõpeb põiksõlmega, mille küljes ripub neljaharuline mõlemalt küljelt emailitud ja 0,5 mm laiuse kuldraamiga ümbritsetud 58 mm läbimõõduga must Malta rist. Risti iga haru välimises otsas asetseva täisnurkse sisselõike kaateti pikkus on 15 mm. Risti esiküljel on oksüdeeritud hõbedast lennuvalmis põhjakotkas, kelle vasaku jala küünte vahel on väike riigivapp ja parema jala küünte vahel kaheteraline mõõk. Kotka tiibadevaheline laius on 23 mm, kotka pikkus pealaest sabasulgede otsteni on 19 mm, mõõga pikkus on 14,5 mm. Risti tagaküljel on 10 mm läbimõõduga must emailitud kuldse äärisega sõõr, mille keskel on ülalt alla kirjutatud kuupäev «24. II 1928»; risti harude tagaküljel on deviis «PRO PATRIA».

  (3) Hõbetäht on 85 mm läbimõõduga reljeefne kaheksaharuline täht, mis koosneb teemandikujulisest tsentrist väljapoole suurenevate kühmude ridadest. Tähe keskel on V klassi teenetemärgi rist.

§ 48.  Kotkaristi II klassi teenetemärk

  Kotkaristi II klassi teenetemärk koosneb samasugusest ristist ja tähest, nagu on I klassi teenetemärgil, kuid rist ripub 40 mm laiuse oranži muareelindi küljes, mille keskel on 1 mm laiune sinine triip, äärtel 3 mm laiune sinine triip ja 1,5 mm laiune oranž kant (lisa 5).

§ 49.  Kotkaristi III klassi teenetemärk

  Kotkaristi III klassi teenetemärk on samasugune nagu II klassi teenetemärk, kuid puudub täht (lisa 5).

§ 50.  Kotkaristi IV klassi teenetemärk

  (1) Kotkaristi IV klassi teenetemärk koosneb samasugusest ristist nagu III klassi teenetemärgil, kuid risti läbimõõt on 50 mm ja iga ristiharu välisotsas asetseva täisnurkse sisselõike kaateti pikkus on 12,5 mm (lisa 5).

  (2) Teenetemärgi lint on 35 mm laiune ja 50 mm pikkune oranž muareelint, mille äärtel on 3 mm laiune sinine triip ja 1,5 mm laiune oranž kant. Lindile on paigutatud siniste triipudega 22 mm läbimõõduga oranž rullmärk.

§ 51.  Kotkaristi V klassi teenetemärk

  Kotkaristi V klassi teenetemärk on samasugune nagu IV klassi teenetemärk, kuid lindil puudub rullmärk (lisa 5).

§ 52.  Kotkaristi medaliklassi teenetemärgid

  (1) Kotkaristi medaliklassi teenetemärgid on kuld-, hõbe- ja raudrist, mis on kujult ja suuruselt samasugused nagu V klassi teenetemärk, kuid need on metallist, ilma emailita (lisa 5).

  (2) Kotkaristi kuld-, hõbe- ja raudristi lint on 35 mm laiune oranž muareelint, mille keskel on 1 mm laiused sinised triibud:
  1) kuldristil on kolm triipu vahedega 2,5 mm;
  2) hõberistil on kaks triipu vahega 6 mm;
  3) raudristil on üks triip.

§ 53.  Sõjaline Kotkaristi teenetemärk

  (1) Kotkaristi teenetemärk on sõjaline, kui talle on lisatud kaks ristuvat mõõka:
  1) ristil on ristuvad mõõgad kinnitatud mõõkade käepidemete kohalt liikuvalt ülemiste ristiharude tippude külge. Mõõkade pikkus koos käepidemega on I, II ja III klassi teenetemärgil 35 mm, IV ja V klassi teenetemärgil ning kuld-, hõbe- ja raudristil 33 mm;
  2) tähel on ristuvad mõõgad kinnitatud tähe põikharude peale, vertikaal- ja horisontaalharud jäävad katmata. Mõõkade käepidemed asetsevad allpool. Mõõkade pikkus on 85 mm.

  (2) Kotkaristi teenetemärgi põhiklassidel ja kuldristil on kuldmõõgad, Kotkaristi hõbe- ja raudristil on ristiga samast metallist mõõgad.

6. jagu Eesti Punase Risti teenetemärk 

§ 54.  Eesti Punase Risti teenetemärgi kirjeldus

  (1) Eesti Punase Risti kõikide klasside teenetemärkide ristid on ühesuguse kujundusega.

  (2) Eesti Punase Risti teenetemärgi kõikide klasside muareelint on helesinine (PANTONE 297 MC).

§ 55.  Eesti Punase Risti I klassi teenetemärk

  (1) Eesti Punase Risti I klassi teenetemärk koosneb suurpaelast ja selle juurde kuuluvast hõbetähest. Suurpael on meestel 110 mm ja naistel 64 mm laiune muareelint, mille keskel on 59 mm laiune sinine triip. Mõlemal pool seda triipu on 6 mm laiune must triip, 7 mm laiune valge triip, 2 mm laiune must triip ja 10,5 mm laiune sinine triip äärtel. Suurpael lõpeb põiksõlmega, mille küljes ripub 41 mm läbimõõduga ja 9,5 mm laiuste harudega rist.

  (2) Risti ümbritseb valge 2 mm laiune emailitud raam, millel on 1,5 mm laiune kullatud äär. Risti nurkades on neli kullatud üheksaharulist kiirtekimpu. Risti esiküljel on 24,5 mm läbimõõduga stiliseeritud kaheksanurk, mida ääristavad Eesti lipu värvid ja mille keskel punasel emailpõhjal on kullatud täht «E». Risti tagaküljel on kuldse äärisega 22 mm läbimõõduga punane emailitud sõõr, millel on kiri «INTER ARMA CARITAS», ja sõõri keskel aastaarv «1919». Risti ülemine haru lõpeb 19 mm kõrguse tuletorni kujutisega. Tuletorn on kaetud valge emailiga, seisab kullatud ja ornamendiga ilustatud alusel ning selle ülemisest otsast hargneb kummalegi poole viis kullatud kiirt (lisa 6).

  (3) Hõbetäht on 86 mm läbimõõduga kaheksaharuline täht läikivate kolmeharuliselt lõppevate kiirtega, mille peal asetsevad tsentrist väljapoole suurenevad ümmargused kühmud. Iga kiirtepaari vahel on kuus tuhmist hõbedast püramiiditaolisest tsentrist väljapoole suurenevatest kühmudest koosnevat rida, mis lõpevad ümmarguse munakesega. Tähe peal asetseb 41 mm pikkuste ja 9,5 mm laiuste harudega punane emailitud rist, mis on ümbritsetud 1,5 mm laiusesse kullatud raami paigutatud 2 mm laiuse valge emailitud triibuga. Ristil on Eesti lipu värvidesse paigutatud 24,5 mm läbimõõduga stiliseeritud kaheksanurgas kolm sinist sammuvat otsavaatavat lõvi kuldsel põhjal.

  (4) Eesti Punase Risti I klassi teenetemärgi rosettmärk on mustvalge triibuga helesinine rosett kuldsel alusel (lisa 7).

§ 56.  Eesti Punase Risti II klassi teenetemärk

  (1) Eesti Punase Risti II klassi teenetemärk koosneb samasugusest tähest ja võrdsete harudega emailitud ristist nagu I klassi teenetemärgil (lisa 6).

  (2) Eesti Punase Risti II klassi teenetemärgi lint on 40 mm laiune muareelint, mille keskel on 21 mm laiune sinine triip. Mõlemal pool seda triipu on 2 mm laiune must triip, 2,5 mm laiune valge triip, 1 mm laiune must triip ja 4 mm laiune sinine triip äärtel.

  (3) Eesti Punase Risti II klassi teenetemärgi rosettmärk on mustvalge triibuga helesinine rosett alusel, mille vasak pool on hõbedane ja parem pool kuldne (lisa 7).

§ 57.  Eesti Punase Risti III klassi teenetemärk

  (1) Eesti Punase Risti III klassi teenetemärk on samasugune nagu II klassi teenetemärk, kuid puudub täht (lisa 6).

  (2) Eesti Punase Risti III klassi teenetemärgi rosettmärk on mustvalge triibuga helesinine rosett hõbedasel alusel (lisa 7).

§ 58.  Eesti Punase Risti IV klassi teenetemärk

  (1) Eesti Punase Risti IV klassi teenetemärgi rist on samasugune nagu II klassi teenetemärgil, kuid risti läbimõõt on 38 mm (lisa 6).

  (2) Eesti Punase Risti IV klassi teenetemärgi lint on 36 mm laiune muareelint, mille keskel on 19 mm laiune sinine triip. Mõlemal pool seda triipu on 2 mm laiune must triip, 2,5 mm laiune valge triip, 0,5 mm laiune must triip ja 3,5 mm laiune sinine triip äärtel. Teenetemärgi lindile on paigutatud 22 mm läbimõõduga rullmärk.

  (3) Eesti Punase Risti IV klassi teenetemärgi rosettmärk on mustvalge triibuga helesinine rosett (lisa 7).

§ 59.  Eesti Punase Risti V klassi teenetemärk

  (1) Eesti Punase Risti V klassi teenetemärk on samasugune nagu IV klassi teenetemärk, kuid lindil puudub rullmärk (lisa 6).

  (2) Eesti Punase Risti V klassi teenetemärgi rosettmärk on teenetemärgi lindi 3 mm laiune riba (lisa 7).

§ 60.  Eesti Punase Risti medaliklassi teenetemärk

  (1) Eesti Punase Risti medaliklassi teenetemärk on sõõrikujuline 29 mm läbimõõduga hõbemedal. Medali esiküljel on 13,5 mm suurune ühepikkuste, 3 mm laiuste harudega reljeefne emailitud punase risti kujutis. Medali tagaküljel on reljeefne kiri «EESTI PUNANE RIST» (lisa 6).

  (2) Eesti Punase Risti medaliklassi teenetemärgi lint on samasugune nagu V klassi teenetemärgil.

  (3) Eesti Punase Risti medaliklassi teenetemärgi rosettmärgiks on V klassi rosettmärk.

7. jagu Teenetemärgi miniatuur 

§ 61.  Teenetemärgi miniatuuri kirjeldus

  (1) Teenetemärgi miniatuur on tema V klassi teenetemärgi täpne vähendatud koopia, mille märgi läbimõõt on 17 mm ja lindi laius 15 mm. Miniatuuri kõrgus koos lindiga on 50 mm.

  (2) Teenetemärgi medaliklassi miniatuur on tema täpne vähendatud koopia põhiklassi miniatuuri mõõtudes.

  (3) Teenetemärgi miniatuuri lindi alaservast 10 mm kõrgemale kinnitatakse teenetemärgi klassi tunnusena vastava klassi rosettmärk.

4. peatükk TEENETEMÄRKIDE REGISTER 

§ 62.  Teenetemärkide register

  (1) Vabariigi Presidendi Kantselei peab teenetemärkide registrit, et tagada korrastatud ülevaade Vabariigi Presidendilt teenetemärgi saanud isikutest ning välisriigilt au- või teenetemärgi saanud Eesti kodanikest ja nendele antud teenetemärkidest ning vastava informatsiooni kättesaadavus selleks õigustatud isikutele ja asutustele.

  (2) Teenetemärkide registri asutab ja selle põhimääruse kehtestab Vabariigi Valitsus määrusega.
[RT I, 16.04.2014, 1 - jõust. 26.04.2014]

§ 63.  Teenetemärkide andmete kandmine registrisse

  Vabariigi Presidendi otsuse alusel kannab Vabariigi Presidendi Kantselei teenetemärkide registrisse käesoleva seaduse § 11 lõikes 4 nimetatud andmed ning antud teenetemärgi nimetuse, klassi, andmise ja kätteandmise aja, samuti andmed teenetemärgi äravõtmise kohta.

§ 64.  Välisriigi au- ja teenetemärgi registreerimine

  (1) Eesti kodanik, kellele on antud välisriigi au- või teenetemärk, peab esitama mõistliku tähtaja jooksul pärast au- või teenetemärgi saamist avalduse Vabariigi Presidendi Kantseleile selle teenetemärkide registris registreerimiseks. Avaldusele lisatakse koopia au- või teenetemärgi tunnistusest.

  (2) Vabariigi Presidendi Kantselei võib registreerida Eesti kodanikule antud välisriigi au- või teenetemärgi ilma isiku avalduseta, kui selle andmine on Vabariigi Presidendi Kantseleile teada.

5. peatükk TEENETEMÄRGI MINIATUUR JA TÄIENDAV ROSETTMÄRK 

§ 65.  Teenetemärgi miniatuuri ja täiendava rosettmärgi saamine

  (1) Teenetemärgi kavaleril on õigus taotleda Vabariigi Presidendi Kantseleilt lisaks talle antud teenetemärgile teenetemärgi miniatuuri ja täiendavat rosettmärki.

  (2) Taotlus esitatakse Vabariigi Presidendi Kantseleile. Enne taotluse esitamist tuleb tasuda riigilõiv riigilõivuseaduses sätestatud suuruses.

  (3) Vabariigi Presidendi Kantselei teeb otsuse taotluse rahuldamise kohta 30 päeva jooksul taotluse saamisest arvates ning väljastab taotletu teenetemärgi kavalerile mõistliku tähtaja jooksul.

6. peatükk VASTUTUS 

§ 66.  Riikliku teenetemärgi valmistamine, kandmine ja muu kasutamine isiku poolt, kellel puudub selleks õigus
[Kehtetu - RT I, 12.07.2014, 1 - jõust. 01.01.2015]

§ 67.  Teenetemärgi ebaseaduslik käitlemine
[RT I, 12.07.2014, 1 - jõust. 01.01.2015]

  (1) Riikliku teenetemärgi ostmise, müümise, vahetamise või muu tasulise üleandmise, samuti teenetemärgi kandmise eest isiku poolt, kellel ei ole selleks õigust, –
karistatakse rahatrahviga kuni 300 trahviühikut.
[RT I, 12.07.2014, 1 - jõust. 01.01.2015]

  (2) Sama teo eest, kui selle on toime pannud juriidiline isik, –
karistatakse rahatrahviga kuni 2000 eurot.
[RT I 2010, 22, 108 - jõust. 01.01.2011]

§ 68.  Riikliku teenetemärgi mitteaustamine

  (1) Riikliku teenetemärgi purustamise, rüvetamise, teotamise või muul viisil ebaväärika kasutamise eest –
karistatakse rahatrahviga kuni 300 trahviühikut.

  (2) Sama teo eest, kui selle on toime pannud juriidiline isik, –
karistatakse rahatrahviga kuni 2000 eurot.
[RT I 2010, 22, 108 - jõust. 01.01.2011]

§ 69.  Toimingud riikliku teenetemärgiga äravahetamiseni sarnase esemega

  (1) Riikliku teenetemärgiga äravahetamiseni sarnase eseme valmistamise, kandmise või muu kasutamise eest –
karistatakse rahatrahviga kuni 300 trahviühikut.

  (2) Sama teo eest, kui selle on toime pannud juriidiline isik, –
karistatakse rahatrahviga kuni 2000 eurot.
[RT I 2010, 22, 108 - jõust. 01.01.2011]

§ 70.  Menetlus

  Käesolevas peatükis sätestatud väärtegude kohtuväline menetleja on Politsei- ja Piirivalveamet.
[RT I, 12.07.2014, 1 - jõust. 01.01.2015]

7. peatükk RAKENDUSSÄTTED 

§ 71.  Riigivapi ketiklassi teenetemärgi andmine tagasiulatuvalt

  Riigivapi ketiklassi teenetemärgi kavalerid on president Lennart Georg Meri ja president Arnold Rüütel.

§ 72.  Asjaajamise üleandmine

  Riigikantselei annab teenetemärkide andmisega seonduva asjaajamise Vabariigi Presidendi Kantseleile üle kuu aja jooksul käesoleva seaduse jõustumisest arvates. Esitatud taotlused loetakse teenetemärgi andmise ettepanekuteks.

§ 73. – § 75. [Käesolevast tekstist välja jäetud.]

§ 76.  Seaduse jõustumine

  (1) Käesolev seadus jõustub 2008. aasta 1. märtsil.

  (2) Käesoleva seaduse § 4 lõige 2 ja § 71 jõustuvad 2008. aasta 23. veebruaril.

  (3) Käesoleva seaduse § 74 jõustub üldises korras.

https://www.riigiteataja.ee/otsingu_soovitused.json